Basic Hydraulic Training Kit

[vc_row full_width=”stretch_row”][vc_column width=”1/6″][vc_column_text css=”.vc_custom_1589423658868{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]

Hydraulics Product Pesentation

[/vc_column_text][/vc_column][vc_column width=”1/6″][vc_column_text css=”.vc_custom_1589423705147{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]

Hydraulics Training Brochure

[/vc_column_text][/vc_column][vc_column width=”1/6″][vc_column_text css=”.vc_custom_1598402698113{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]

Hydraulic Training Modules

[/vc_column_text][/vc_column][vc_column width=”1/6″][vc_column_text css=”.vc_custom_1589423771631{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]

Hydraulic Basic ISO

[/vc_column_text][/vc_column][vc_column width=”1/6″][vc_column_text css=”.vc_custom_1589423813523{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]

Hydraulic Basic 3D

[/vc_column_text][/vc_column][vc_column width=”1/6″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text][rev_slider alias=”Basic Hydraulic Training Kit”][/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]‘Hytech’ Hydraulic training kit is designed for educational purpose where students can easily operate the training kits to get necessary hands on experience.

Safety is of utmost importance when it comes to operation by students and we have focused on the same aspect in both models of our hydraulic training kits.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Hydraulic training kit (Model: Basic) is designed to provide hands on experience on conventional hydraulic valves. In other words, no valve in Basic Hydraulic training kit requires electrical supply to operate.

There are two relief valves provided in the kit, one on the hydraulic powerpack and the other on the training kit. Participants can use the valve mounted on the training kit for experimental purpose. Valve mounted on the hydraulic powerpack decided the maximum operating pressure of the training kit.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text][/vc_column_text][/vc_column][vc_column width=”1/2″][vc_raw_html]JTNDaWZyYW1lJTIwaWQlM0QlMjIzZHZpZXdlcnBsYXllciUyMiUyMHNyYyUzRCUyMmh0dHBzJTNBJTJGJTJGd3d3LjNkdmlld2Vyb25saW5lLmNvbSUyRm1lbWJlcnMlMkZJZDJhZTA5OWU3MmJkMmE5YjBkZDliNjcxODhjZGE0OTYxJTJGcXVnT3h0MDFsVzcxZWdKJTIyJTIwd2lkdGglM0QlMjI1MDAlMjIlMjBoZWlnaHQlM0QlMjI0MDAlMjIlMjBmcmFtZWJvcmRlciUzRCUyMjAlMjIlMjBzY3JvbGxpbmclM0QlMjJubyUyMiUyMGFsbG93ZnVsbHNjcmVlbiUzRCUyMmFsbG93ZnVsbHNjcmVlbiUyMiUzRVlvdXIlMjBicm93c2VyJTIwZG9lcyUyMG5vdCUyMHN1cHBvcnQlMjBpZnJhbWVzLiUzQyUyRmlmcmFtZSUzRQ==[/vc_raw_html][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Basic hydraulic training kit is equipped with conventional valves which are operated manually.

Basic hydraulic training kit is provided with Automsim circuit design and simulation software. Participants can first design the hydraulic circuit on AutomSim software, simulate the circuit and then execute the same on the hardware kit.

Valve plates are indigenously designed for CETOP 3 mountings. P, T, A and B ports are laser engraved on valve plates to make sure that students understand the different ports of a valve very clearly.

Pressure as well as Tank lines from Hydraulic powerpack are hard piped to P manifold and T manifold on the training platform. This makes sure that the necessary connections required to operate the training kit and to avoid any accident can not be changed at any time.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text][/vc_column_text][/vc_column][vc_column width=”1/2″][vc_raw_html]JTNDaWZyYW1lJTIwaWQlM0QlMjIzZHZpZXdlcnBsYXllciUyMiUyMHNyYyUzRCUyMmh0dHBzJTNBJTJGJTJGd3d3LjNkdmlld2Vyb25saW5lLmNvbSUyRm1lbWJlcnMlMkZJZDJhZTA5OWU3MmJkMmE5YjBkZDliNjcxODhjZGE0OTYxJTJGSWZkVHpzMG51b0xMMUhxJTIyJTIwd2lkdGglM0QlMjI1MDAlMjIlMjBoZWlnaHQlM0QlMjI0MDAlMjIlMjBmcmFtZWJvcmRlciUzRCUyMjAlMjIlMjBzY3JvbGxpbmclM0QlMjJubyUyMiUyMGFsbG93ZnVsbHNjcmVlbiUzRCUyMmFsbG93ZnVsbHNjcmVlbiUyMiUzRVlvdXIlMjBicm93c2VyJTIwZG9lcyUyMG5vdCUyMHN1cHBvcnQlMjBpZnJhbWVzLiUzQyUyRmlmcmFtZSUzRQ==[/vc_raw_html][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Pressure as well as Tank lines from Hydraulic powerpack are hard piped to P manifold and T manifold on the training platform. This makes sure that the necessary connections required to operate the training kit and to avoid any accident can not be changed at any time.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Hydraulic Training Kit (Basic):

Horizontal work area on front face	1200mm x 360mm
Horizontal work area on back face	1200mm x 360mm
Vertical work area on front face	1200mm x 720mm
Vertical work area on back face	1200mm x 720mm

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Hydraulic powerpack provided has following specifications:

Tank Capacity	30 Liter
Motor Capacity	2 HP
Pump Capacity	6 LPM / 8LPM
Pressure Generation Capacity	120 Bar
Relief Valve Capacity	100 Bar
Oil Used	Servo 68 / Enklo 68
Hydraulic Hose Capacity	280 Bar
Hydraulic Quick Connect Coupling Capacity	210 Bar
Hydraulic Plate Capacity	Tested at 210 Bar

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Hydraulic training kit is provided with four castor wheels with load carrying capacity of 150 KG each and equipped with brakes. Additional mounting stands are provided which can be lowered when needed to provide additional stability to the kit by lifting castor wheels breaking their contact with ground surface.

Hose mounting stand is provided on the left hand side of a training kit.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text css=”.vc_custom_1598402759613{margin-top: 2px !important;margin-bottom: 2px !important;padding-top: 5px !important;}”]Downloads

[/vc_column_text][/vc_column][/vc_row]